How to troubleshoot an hp laptop?

Hp technical support

Hp is called as Hewlett Packard. It is an American company and they are responsible for creating information products. This company headquarter is situated in Palo Alto, California. They are responsible for producing a different range of products from software to hardware. This company was founded on January 1, 1939. The name of the founder of the company is bill Hewlett and David Packard. They serve their products worldwide.

Resolit is a company and it is situated in the USA and the address of the company is ALEPH information technologies, INC 16331 spring creek LN, Plainfield IL 60586 USA. If you have any problem related to hp support (computer, laptop, printers), etc and you're living in the USA then call us on toll-free number 1-877-637-1326 and 1-833-430-6109. You can also contact us on our email address support@resolit.us

How to troubleshoot a hp laptop?

·         Find out the model number and the serial number. You will find this information on the bottom of the laptop. You need this information if support is required and if you want to order parts

·         The power cord will be removed to ensure whether the laptop is turning on with the battery. If the laptop is not turning on then this might be because of a dead battery.

·         The power cord will be plugged into the computer and into an electrical outlet. Make sure that there is the power to the outlet. After that try to turn on the computer

·         See whether the computer is turning on and the desktop is on the computer. Power is not there to the computer then you have to replace the power supply. If there is power then the light will blink and it will appear on the screen. If there is the power to the computer and the screen does not turn on then there might be the problem with hp support driver

·         Check for the problem in the hard drive. To perform this task bootable recovery disk will be inserted into CD drive.  The computer will be restarted. If the screen appears after booting then hp hard drive is corrupt or there might be a problem with hp computer operating system. From backup copy operating system will be reinstalled. If you cannot perform this task then replace hp hard drive.

·         Check whether the computer is connecting with the internet. Check whether the modem or router is working properly if you cannot connect yourself with the internet. Try other alternative and that is trying to connect hp computer with the internet using a wired connection if it is connecting with the wired connection then replace your wireless card.

·         Try to put a disk in the hp disk drive. Try reinstalling the driver if the drive is not working and if the driver is not operating then replace it.

How to resolve troubleshooting problem of dell computer?

Dell computer support

It is a company and it is situated in America and the headquarter of this company is situated in round rock, Texas, US.  This company is responsible for developing, selling, repairing computer related products. The name of the founder of this company is Michael Dell. According to the annual report of 2018. There is an estimate of 145000 people working in this company all over the world. Some of the products that they sell are PC, servers, computer peripherals, cameras, etc. this company was founded on February 1, 1984.

CallPC expert is a company where there are professional experts who are responsible for solving problems related to computers and printers. There are various types of computers available and some of them are dells, hp, apple, etc

How to resolve troubleshooting problem of Dell computer?

There are some steps that can be taken to resolve the issue of troubleshooting of Dell computer and they are:

·         AC adapter will be removed from the computer and also, remove the AC power cord from the wall outlet. Hang on for two minutes for power to void from AC adapter

·         Computer battery will be removed

·         Snap the computer power button for the duration of 15 sec.

·         Thrust the AC plug of the adapter and make sure that it is properly  seated

·         To know good working outlet plug in the AC power cord

·         The power button will be pressed to ensure that the computer is on

·         If the computer is turning on then switch it off and put the battery back in

·         To see f computer turn on press the power button.

In the event that the PC control on, check if the PC closes down in BIOS. Restart the PC and tap F2 on Dell logo.

Additionally, run diagnostics on the PC. Restart the PC by holding the FN and Power catch at the same time. Check if the diagnostics keep running on the PC.

Visit here on dell computer support if you have any problem related to dell computers and want that computer fixed by our professional experts.

Computer start but the monitor is black. How to solve this issue?

Hp computer support

Hp is called as Hewlett Packard. It is an American company and they are responsible for creating information products. This company headquarter is situated in Palo Alto, California. They are responsible for producing a different range of products from software to hardware. This company was founded on January 1, 1939. The name of the founder of the company is bill Hewlett and David Packard. They serve their products worldwide.

CallPC expert is a company and this company is situated in aleph information technologies, INC 16331 spring creek LN, Plainfield IL 60586 USA and this company is responsible for giving a solution for problems related to computers and printers.

The computer starts but the monitor is black. How to solve this issue?

There are some steps that can be you want to resolve this issue and these steps are:

·       Hard reset can be performed to get rid of this problem

1.     Switch off your computer

2.     All the peripheral devices, USB  devices, and media cards will be disconnected

3.     The AC power button will be disconnected

4.     The power button will be pressed for the duration of 15 seconds

5.     Cluster the AC power adapter

6.     Switch on your computer 

·        If the problem is solved then it's you’re done and if not then continue the next step

·       Pay attention of what computer is saying and give a view to the black light to get rid of this issue

1.    If the computer is giving a beeping sound when it is turned on then there is a possibility that card, cable, processor inside the computer is loose. Check for any loose component.

2.     Do you see the PC's capacity light turn on? On the off chance that the power light on the PC isn't on, the PC isn't beginning. To investigate a PC that does not begin, see the HP bolster report Computer Does Not Start.

3.     If the the computer is still making the beeping sound and fans are spinning then follow the steps to reset BIOS.

·       When the the computer screen is blank then perform the BIOS resetting process

1.    Press F10 again and again for 8 seconds after turning ON the computer

2.    Down arrow key will be pressed for three times

3.    Enter key will be pressed for two times

This will solve your problem. Visit hp computer support and here you can talk to our experts and solve any problem of you related to hp computers and any other computer.

How to fix a brother printer?

Brother printer support

It is a Japanese company and they manufacture electronics products and its headquarter is situated in Nagoya, Japan. Some of the products that they produce are printers, desktop computers, label printers, fax machine. Products of this company are sold under their own name and under original equipment manufacturer. This company was founded in 1908. The name of the founder of the company is kanekichi Yasui.   The current chairman of the company is Yoshihiro Yasui and the current president of the company is toshikazu Koike.

Call pc expert is a company who deals with the problem related to printers and computer. If you have any problems related to Epson printers then kindly visit this link of same website Epson printer support service.

How to fix a brother printer?

Fixing printer is easy to work. Some of the following steps that can be taken to get rid of this problem and it is as follows:

·       Check if there are any jams or blockage in the printer and if you find any then clean it

·       If there are print jobs in the queue then delete it. Navigate to control box of the printer and double snap on a printer that you want to select and delete any print jobs

·       Unplug the printer and turn it off. Hang on for 30 seconds and then print it on again

·       The computer will be restarted. All programs will be closed and the computer will be shut down and hang on for some seconds. Turn your printer off  and the printer will be restarted and computer

·        Select the printer after going to the printer panel and ‘delete’ option will be selected there. Select ‘add printer wizard’ and add the printer again.

·       Go to brother website and download the latest drivers and find the latest drivers there. Right click on the printer will be performed and ‘properties’ will be clicked. Find the button that says ‘update driver’. After selection wizard will be pointed to find the new drivers available in download

How can we recover dry printer head?

Epson printer support

Epson is a Japanese company and they sell electronic products. They are one of the largest manufacturers of computer printers all over the globe. Its headquarter is situated in Suwa, Nagano, Japan. There have numerous subsidiaries all over the world and major products that they produce are an inkjet printer, dot matrix printer, laser printer, desktop computer, laptops. This company was founded in May 1942. The current chairman of the company is seji hanaoka.

Call pc expert is a company who deals with the problem related to printers and computer. If you have any problems related to Epson printers then kindly visit this link of same website Epson printer support service.

How can we recover dry printer head?

Some of the steps that we can take to get rid of this problem are listed below:

·        The cartridges will be removed

Head of cheap printers are attached to ink cartridges but these types of cartridges are costly and the quality of these cartridges is bad. I have a printer and it is canon IP4600 and it is not a costly printer but it is having a good quality of prints.  Remove the cartridges carefully after moving the head as it is shown in the image above

·        The head will be removed

To perform this task pull the gray lever and then remove the head of the printer. Head will come out easily and it will give no friction when that task will be performed.  Make sure that you don’t touch the back contacts and bottom side where you will realize that there are ink nozzles. They are very delicate, don’t rub it with the paper if you see a cover with ink

·        Observe where is proper suction tube  

You need a little bit good fortune but if you’re having a maker shop that is good equipped then it will be good for use. Find the rubber tubes with the right diameter for the printer head cartridge joint. These tubes are not important since most likely its sufficient plunge the head (the printer one, not you're!) in water. I think you will be successful if you try this step

·        Submerge into water

The plastic flat cover will be set up with some amount of water. Make sure that you don’t use a ceramic plate or anything that is made of up hard material. This is why because nozzle borders are solid but this thing has happened with me earlier when I was using IP4200 Epson printer.

Insert it into the water for a moment. Dry ink will be dissolved by the water. Till then the tube of rubber will try to do suction some water from the plate. To perform this task doesn’t suck the tube. It’s better to push the sides after keeping it in place, the open end will be closed. Now you have to wait for an hour but you can also leave it for the whole night if you have time. At the back side of the printer head, the contacts ought to be waterproof, however, don't wet them to an extreme.

·        The wet head will be dried

When you will be reinstalling the head on the printer. Use a paper napkin to dry it, don’t pat it and wait for some time so that water comes out of it. If you use microfiber cloth then it will be better so fibers of them will not be clogged on the nozzle.  You will observe some colored lines as it is shown in the image and it will be from each nozzle.

·        Almost done

Now the printer head is not dirty anymore. Don’t worry if it is having some water inside it.

·        Brand new

Head will be installed back into its place, the lever will be closed and all 5 cartridges will be placed back, turn off the printer after closing it.

When the printer will be turned on again. Clean the nozzle properly and print some sheets to check whether the nozzles are working properly or not.

There are various types of printer problem and what steps we can take to solve them?

Okidata printer support

Oki electronic industry co. ltd is a Japanese company and they manufacture printer’s products and they are also responsible for selling those products. This company headquarter is situated in toranomon, Minato-ku, Tokyo. Its first manufactured product was telephone and they produce that product in 1881 but they started manufacturing other products also like automated teller machine (ATM) and printer. Oki data is the name of printer business they are operating under the brand name OKI. The semiconductor business is operated by oki.

Visit here on callPC expert  to find the number of our experts and get their advice to resolve all issues related to different types of printers and computers.

There are various types of printer problem and what steps we can take to solve them?

·       I can’t print with my I pad

iPods are useful tools that are capable of performing different kinds of tasks like they support games and they are also used for hosting spreadsheets. With the help of wireless printers printing jobs can be done that also support air print.

·       My printer says that it has empty cartridge but it is not empty

When there is a warning of empty cartridge given by the printer then that means you should replace your old cartridge with the new cartridge but do not empty your cartridge until there is die away color.

·       Paper is plunged in the printer

When there is paper stuck in the printer then it is due to small snip of notepaper. Open the entire printer flap after removing all the sheets of paper out from the tray. The torch can be used to observe the small snip of paper and then it will be removed.  Printing the process can be continued without having any disruptions.

Some problems on Okidata machine

·       Output tray is not closing down

Cause	solution	reference
image drums along with belt unit are not suitably fixed	Four image drums will be removed and after that remove and properly install belt unit again in the printer	Belt the unit will be replaced
Toner blue lever is not properly fixed on its position	blue levers of the turned until tops are aligned with overhang in back of cartridge toner	Belt unit will be replaced

·       Printing is not starting on the machine

Cause	Solution	reference
Error is been displayed	On-screen instruction will be followed after checking the error code	Error message list
The USB cable is not connected to the power source	The USB cable will be connected to power source firmly	Connecting a LAN cable
The USB cable is having problem	Replace the USB cable with other	-

·        

·       Print information isn’t sent

Cause	solution	reference
The USB cable is vandalism	The new cable will be connected	-
On computer time-out period is elapsed	Time-out period should be set off a longer period	-

·       There is an awkward sound

Cause	Solution	reference
machine is prone	Always place your machine on a flat surface	-
There are unwanted items inside machine	check your machine and check for unwanted items and if there are any then get rid of them	-
The output tray is opened	close the output tray	name of components

Okidata printer support is a page on the same website of callPC expert and here various problems of Okidata printer are given along with their solutions. If you’re living in US/Canada then call on this number +1-833-430-6109 and talk to our experts and get their help. It is a toll-free number

error codes list and how we can solve them?

Lexmark printer support

It is a company owned by the Chinese and it is situated in the US. They manufacture laser printers. Company headquarter is situated in Lexington, Kentucky. This company was founded in 1991. They serve their products worldwide. Call PC expert to solve issues related to Lexmark printers. If any user is having problem-related to the printer then call PC expert, then you can call PC expert on +1-833-430-6109 if your living in US or Canada and +44-150-782-3510 if your living in the UK.

List of error codes with their solutions

1.     Error code:900

Explanation

It is a service error. This error takes place when there is any hardware or network issue. If the computer is properly connected with the printer and still this error is taking someplace then this is because of network and if computer and hardware are not connected and this error is taking place then this is due to hardware.

Solution

The computer-printer connection will be checked and this can resolve this issue. For hardware, fixes take technical help

2.     Error code:901

Explanation

It is an error of engine flash. It occurs when there are temporary glitches in the engine.

Solution

 To get rid of this error simply switches off your printer for the duration of five minutes. If this error is not coming after turning on the printer then that error is a temporary glitch and it will not require any troubleshooting  

3.     Error code:902

Explanation

Engine board software failed

Solution

Switch off your printer for the duration of 10 minutes and after that turn it on and see if this error is gone. If not then seek a technician

4.     Error code 903,904,905 AND 906

Explanation

Fault in system printer board

Solution

Turn off your printer for a duration of 10 minutes. If the error is gone then try to print some pages and watch it for 2-3 weeks and if the problem still exists then reset NVRAM

Visit here on Lexmark printer support and talk to our experts to get rid of any problem related to Lexmark printer. They are highly qualified in solving problem related to printers and computers.